Collectable Vintage Beagle Dogs
For your enjoyment only. This is my own personal vintage dog figurine collection. They are not for sale.
For your enjoyment only. This is my own personal vintage dog figurine collection. They are not for sale.
Pictured is a vintage 1970s Beagle dog by Goebel. It is of a tricolor Beagle Harrier dog in a standing pose. This type of dog came with a sticker on it that read Beagle Hound Dan. Its tongue is sticking out and its tail is up high in the air. On the bottom of the figurine is the Goebel trademark 5 (TMK-5) Goebel logo of the bee inside the V above the 'bel' in the name Goebel. Below the name Goebel it reads W. Germany. This trademark dates the figurine between 1972 and 1978. It measures 4 1/2 inches tall from the ground to the top of the head, 5 1/4 inches long from the tip of the nose to the back of the leg and 2 1/4 inch wide across the back legs from paw to paw.
Vintage 1970s Beagle Harrier dog by Goebel—front-side view
Vintage 1970s Beagle Harrier dog by Goebel—front-side view
Vintage 1970s Beagle Harrier dog by Goebel—side view
Vintage 1970s Beagle Harrier dog by Goebel—back-side view
Vintage 1970s Beagle Harrier dog by Goebel—back-side view
Vintage 1970s Beagle Harrier dog by Goebel—image showing the Goebel trademark 5 (TMK-5) Goebel logo of the bee inside the V above the 'bel' in the name Goebel. Below the name Goebel it reads W. Germany.
Pictured is a vintage 1950s porcelain Beagle dog figurine by Goebel. It is of a tricolor hound dog in a sitting pose. On the bottom of the figurine is the Goebel trademark 2 (TMK-2) logo of the full bee inside the V. This dates the figurine between 1950 and 1956. There is also a black stamp that reads Germany and an engraving. I cannot make out all of the engraving. What I can read says CH 5. There are a few numbers missing. There is a shiny silver sticker with a number on it that reads 237586. I do not think it is a Goebel sticker of any kind. Perhaps it was a store sticker; I am not sure. It measures 5 1/4 inch from the ground to the top of the head, 4 inches wide from the snoot to the base of the tail and 2 3/4 inch wide across the bottom from hip to hip.
Vintage 1950s porcelain Beagle dog figurine by Goebel—front view
Vintage 1950s porcelain Beagle dog figurine by Goebel—side view
Vintage 1950s porcelain Beagle dog figurine by Goebel—back-side view
Vintage 1950s porcelain Beagle dog figurine by Goebel—back-side view
Vintage 1950s porcelain Beagle dog figurine by Goebel—side view
Vintage 1950s porcelain Beagle dog figurine by Goebel—image showing the Goebel trademark 2 logo of the full bee inside the V. This dates the figurine between 1950 and 1956. There is also a black stamp that reads Germany and an engraving. I cannot make out all of the engraving. What I can read says CH 5. There are a few numbers missing. There is a shiny silver sticker with a number on it that reads 237586. I do not think it is a Goebel sticker of any kind. Perhaps it was a store sticker; I am not sure.
Pictured is a vintage trademark 1 Beagle puppy figurine by Goebel. The pup is attached to a white base. It is playfully lying on its side. It is brown and white with black tips on its paws and black nose and eyes. There is a hole in the porcelain at the tip of the tail. There was obviously something attached to the tail that is no longer there. On the bottom of the figurine is a double Goebel crown mark. One is stamped in blue and the other is incised into the porcelain. The crown mark dates the figurine between 1935 and 1949. There is also an engraving that reads CH 193. It measures 2 3/4 inch tall from the ground to the tip of the raised paw, 3 2/8 inch long across the base from head to tail and 1 7/8 inch wide across the base from the back to the front of the dog. Made in Germany
Vintage TMK-1 Beagle puppy figurine by Goebel
Vintage TMK-1 Beagle puppy figurine by Goebel
Vintage TMK-1 Beagle puppy figurine by Goebel
Vintage TMK-1 Beagle puppy figurine by Goebel
Vintage TMK-1 Beagle puppy figurine by Goebel—image showing the double crown marks, one stamped in blue (bottom) and the other incised (top). It is a symbol of a crown. Below the crown is of the letters WG overlapping one another, which are the initials of William Goebel. There is also an engraving that reads CH 193 and some type of red stamp. The figurine dates between 1935 and 1949.
This is a rare vintage Hagen-Renaker miniature Beagle in a crouching pose. It is from the 1960s and was made at the old Monrovia, California factory. It is item number A-456. It is hand-painted tri-color in brown, black and white and measures about 1 inch tall from the ground to the tip of the tail, 1 1/4 inch long from the back leg to the snoot and 3/4 inch wide across the front from paw to paw. Made in the USA
Rare vintage Hagen-Renaker Monrovia miniature Beagle in a crouching pose—front view
Rare vintage Hagen-Renaker Monrovia miniature Beagle in a crouching pose—side view
Rare vintage Hagen-Renaker Monrovia miniature Beagle in a crouching pose—back-side view
Rare vintage Hagen-Renaker Monrovia miniature Beagle in a crouching pose—back-side view
This is a rare vintage Hagen-Renaker miniature Beagle in a standing pose with its paw up. It is from the 1960s and was made at the old Monrovia, California factory. It is hand-painted tri-color in brown, black and white and measures about 1 inch tall from the ground to the tip of the tail, 1 1/4 inch long from the back leg to the snoot and 3/4 inch wide across the front from paw to paw. Made in the USA
Rare vintage Hagen-Renaker Monrovia miniature Beagle in a standing pose with its paw up—front-side view
Rare vintage Hagen-Renaker Monrovia miniature Beagle in a standing pose with its paw up—front-side view
Rare vintage Hagen-Renaker Monrovia miniature Beagle in a standing pose with its paw up—side view
Rare vintage Hagen-Renaker Monrovia miniature Beagle in a standing pose with its paw up—back-side view
Rare vintage Hagen-Renaker Monrovia miniature Beagle in a standing pose with its paw up—back-side view
Vintage Hagen-Renaker miniature Beagle designed by artist Helen Perrin Farnlund. It is item number 432 and was first added to the HR line in 1960. The very first dogs were hand painted white with brown and black spots. They later were airbrushed tricolor white, brown and black. This is an airbrushed dog so is not one of the first dogs in production but it is one of the first airbrushed figurines and does have crazing all over. It is of an adult tricolor Beagle dog in a standing pose. It measures about 1 1/2 inch tall from the ground to the top of the head, 1 3/4 inch long from the tip of the nose to the tip of the tail and 1 inch wide across the back from paw to paw. Made in the USA
Vintage Hagen-Renaker miniature Beagle designed by artist Helen Perrin Farnlund—front-side
Vintage Hagen-Renaker miniature Beagle designed by artist Helen Perrin Farnlund—front-side view
Vintage Hagen-Renaker miniature Beagle designed by artist Helen Perrin Farnlund—side view
Vintage Hagen-Renaker miniature Beagle designed by artist Helen Perrin Farnlund—back-side view
Vintage Hagen-Renaker miniature Beagle designed by artist Helen Perrin Farnlund—back-side view
This is the Hagen-Renaker miniature “Beagle Pup” designed by artist Helen Perrin Farnlund. It is item number 434 and was first added to the HR line in 1960. It is of a tiny Beagle puppy in a sitting pose. The very first pups were done in a hand painted tricolor of white, brown and black. Later they were airbrushed with a brown body with black ears and white undersides. The next color variation that came out was airbrushed in a tricolor of black, brown and white, shown above. It measures 7/8 inch from the ground to the top of the head, 1 inch from the tip of the tail to the front paw and 3/4 inch wide across the back from paw to hip. Made in the USA
Hagen-Renaker miniature “Beagle Pup” designed by artist Helen Perrin Farnlund—front view
Hagen-Renaker miniature "Beagle Pup” designed by artist Helen Perrin Farnlund—side view
Hagen-Renaker miniature "Beagle Pup” designed by artist Helen Perrin Farnlund—back-side view
This is another Hagen-Renaker miniature “Beagle Pup” that I own. This one was purchased at a flea market in the early 1990s.
This is a vintage ceramic Beagle figurine with a chain ID collar that reads “Beagle.” The legs are on the longer side making it look more like a Beagle Harrier. It stands 4 inches tall, 4 1/2 inches long and 1 1/2 inches wide. It has the original 'Japan' sticker still on the bottom. Very nicely detailed with deep colors and a flat finish. The tail and head are up very high, indicating a dominant attitude. In excellent condition with no chips, cracks or repairs.
Vintage ceramic Beagle figurine with a chain ID collar that reads “Beagle”—front view
Vintage ceramic Beagle figurine with a chain ID collar that reads “Beagle”—front view
Vintage ceramic Beagle figurine with a chain ID collar that reads “Beagle”—side view
Vintage ceramic Beagle figurine with a chain ID collar that reads “Beagle”—Back view
Vintage ceramic Beagle figurine with a chain ID collar that reads “Beagle”—image showing the original Japan sticker on the bottom of the figurine.
This hound looks more like a Beagle Harrier than an American Beagle, as it’s a little on the lanky side. This is a porcelain figurine in a standing pose. It's 3 1/2 inches tall from the ground to the top of the head, 5 1/2 inches long from the back leg to the tip of the nose and 1 1/2 inch wide. It has a nice semi-gloss finish and is in great condition. On the bottom of the right front paw stamped in red is Japan.
Porcelain Beagle Harrier figurine in a standing pose—front-side view
Porcelain Beagle Harrier figurine in a standing pose—side view
Porcelain Beagle Harrier figurine in a standing pose—front view
Porcelain Beagle Harrier figurine in a standing pose—back view
Porcelain Beagle Harrier figurine in a standing pose—back view
Porcelain Beagle Harrier figurine in a standing pose—image showing the green Japan stamp on the bottom of the front right paw.
My vintage dog collection would not be complete without the famous Beagle Snoopy and his friend Woodstock. This little candle set was given to my husband as a gift in the 1970s. Amazingly enough it's in excellent condition. I can't even find any scratches in the wax. They are both about 3 inches tall from the ground to the top of the wick. Snoopy's head is three inches long from the back of the head to his nose and about 1 1/4 inch wide from ear to ear. Woodstock is 2 1/4 inches long from the back of the tail to the front of the beak and 1 inch wide across the front of the chest.
Snoopy and Woodstock 1970s candle set
Snoopy and Woodstock 1970s candle set
Snoopy and Woodstock 1970s candle set
Snoopy and Woodstock 1970s candle set
Snoopy and Woodstock 1970s candle set
Snoopy and Woodstock 1970s candle set
Snoopy and Woodstock 1970s candle set
This poor little bone china Beagle suffered a horrible accident. He fell and broke both of his front legs off. Living in a teenager’s bedroom in the 1980s was rough. But he never got tossed and is still a cute little thing, even without his legs. He is 3/4 inch tall from the ground to the top of the head, 1 1/4 inch to the side of the head to the furthest back paw and 1 inch wide from the back paw to the backside of the dog.
Cute little bone china Beagle figurine with two broken front legs
This is a hand painted vintage bone china tiny Beagle puppy figurine. She has a sweet, soft look in her eyes. She is 1 inch tall from the ground to the top of the head, 1 1/4 inch long from the front of the snoot to the back of the tail, and 3/4 inch wide from hip to hip. On the bottom is a gold and black sticker that reads Made in China.
Hand painted vintage bone china tiny Beagle puppy figurine—front view
Hand painted vintage bone china tiny Beagle puppy figurine—side view
Hand painted vintage bone china tiny Beagle puppy figurine—back-side view
Hand painted vintage bone china tiny Beagle puppy figurine—back view
Hand painted vintage bone china tiny Beagle puppy figurine—image showing the gold and black sticker that reads Made in China.
